PB Pipe & Fitting(Polybutylene)

PlumbFast is a PB pipe & fitting (Polybutylene) manufacturer in pollution free material and favorably commented upon hot & cold water supply system.
Setup 1974

• Producing PB since 1992
  
• Products (Thermoplastic PB pipes & fittings)
  
• Sectors (Construction, marine, and heating &plumbing sectors)
  
• In-house "Thermo cycling Test Rig"

PB Pipe

• Pipe has low thermal conductivity coupled with its flexible nature enables it to coup with low temperatures.
  
• High impact resistance
  
• Anti-corrosive properties
  
• Flexibility removes hammer effect.
  
• Oxygen barrier added reduces ingress of it through the wall

PB Fitting

• Quick push-fit system
  
• No tools required
  
• As made from PB the fitting will expand and contract with the pipe
  
• Fittings are demountable
  
• Non-toxic

Applications

• Indirect/direct mains fed cold water services
  
• Vented/unvented hot water system
  
• Underfloor heating systems
  
• Caravan & boats where flexibility low weight and resistance to freezing and corrosion is essential

Specific Character

Plumb Fast PB Pipe is made of Poly Butylenes material which is a resin party of the poly Orephine extracted from Poly Buden-1, it has an outstanding corrosion resistance and chemical resistance, so widely being used for the interior and exterior pipe laying material.

Semi-Permanent Durability

Plumb Fast PB Pipe is superior in tensile strength and breaking resistance, abrasion resistance and durability, so able to use semi-permanently, particularly superior in cold proof and suitable for the pipe laying in our country.

Creeping Nature with Heat Proof Pressure Roof

Plumb Fast Pipe is superior in heat proof due to the using temperature from -20 to the extent of 100, so excellent in creeping that command the durability of product than any other kind of resin.

Light and Soft

Plumb Fast Pipe is light and easily bending and so easily able to carry even in a narrow space also displays an excellent efficiency during the pipe laying work for the Korean under floor heating system as they are soft and easily bending.

Conveniently Carrying Out Work

It is possible to have renovated pipe laying system without tools, therefore greatly serve while saving terms of work, personnel expenses and working expenditure too.

Corrosing Resistance

It is possible to use concrete working, as it shall not be corroded by salt and may use for the burying pipe in the ground, also not to be rusted even in the chemical products, so it is suitable to use for the waster system since it is excellent in Chlorine resistance in comparison with the other products.

Impact Resistance

The material itself has a strong elasticity and impact resistance and so possible to protect from freezing broken, enable to protect from the loss of defect.

Suitable for The Centrifugal Heating System

It should be suitable to use for the centrifugal heating system which requires high temperature and high pressure since this pipe has a wide rage of resistances for temperature and pressure.

Properties

Specification

Specified of Out PB Pipe

Dia (mm)	Outside(mm)		Thickness(mm)
	Basic Dimension	Tolerance	Basic Dimension	Tolerance
12mm (1/2")	15.88	.2	1.60	.2
15mm	20.10	.2	1.90	.2
18mm(3/4")	22.22	.2	2.03	.2
20mm	25.10	.2	2.30	.2

Sanitary Use (For hot water supply)

Dia (mm)	Outside (mm)		Thickness (mm)
	Basic Dimension	Tolerance	Basic Dimension	Tolerance
10	10.00	±0.1	1.6	±0.1
15	15.00 & 15.88	±0.1	1.6	±0.1
20	20.10	±0.1	1.9	±0.1
22	22.00 & 22.22	±0.1	2.03	±0.1
25	25.10	±0.1	2.3	±0.2
28	28.00	±0.1	2.60	±0.2
35	35.00	±0.1	3.17	±0.3

Heating (For water/Korean warm floor)

Dia (mm)	Outside (mm)		Thickness (mm)
	Basic Dimension	Tolerance	Basic Dimension	Tolerance
10	10.00	±0.1	1.6	±0.1
15	15.00 & 15.88	±0.1	1.6	±0.1
20	20.10	±0.1	1.9	±0.1
22	22.00 & 22.22	±0.1	2.03	±0.1
25	25.10	±0.1	2.3	±0.2
28	28.00	±0.1	2.60	±0.2
35	35.00	±0.1	3.17	±0.3

Temperature Used

Temperature	20	30	40	50	60	70	80	90
Pressure(kg/Cm)	16.3	15.2	14.4	13.3	11.9	10.5	8.4	5.7

Comparative Table

Item	Dong Yang PB Pipe	PP- C Pipe	XL PE Pipe	Cpooer Pipe
Ingredient	Polyethylene	Air Combination	Bridge Construction of High Density Polyethylene	Bronze
Sanitarily	Good	Good	Not Used	Produced Corrosing
Processing	Simple Push-fit	Soluble Joint	Connected Bronz Coupling	Copper Welded
Corrosion Resistance	Excellent	Excellent	Excellent	No Good
Kcal/m hr°C	0.32	0.32	0.32	332
Kcal/Cm2 hr°C	8.49	8.54	8.547	8.937

Plumb Fast PB (Poly-Copolymer) Products.

Pipe & Fittings

Poly Buty Line Pipe (Sanitary Use)		Poly Buty Line Pipe Coil
	10mm 15mm 20mm 22mm 25mm 28mm 35mm		10mm 15mm 20mm 22mm 25mm 28mm 35mm

Poly Buty Line Pipe		Poly Straight Connector
	10mm 15mm 20mm 22mm 25mm		10mm 15mm 20mm 22mm 25mm 28mm 35mm

Elbow 90°		Equal Tee
	10mm 15mm 20mm 22mm 25mm 28mm 35mm		10mm 15mm 20mm 22mm 25mm 28mm 35mm

Reduced		Air Chamber Cap
	15 x 10mm 15 x 20mm 15 x 22mm 20 x 25mm		15mm 20mm 22mm

End Reduced Tee		Branch and One End Reduced Tee
	15 x 10 x 15mm 22 x 15 x 22mm 25 x 20 x 25mm 28 x 15 x 28mm 28 x 22 x 28mm 35 x 28 x 35mm		15 x 10 x 10mm 20 x 15 x 15mm 22 x 15 x 15mm 25 x 20 x 20mm

End Reduced Tee		For Water Elbow
	12 x (1/2)" 15 x (1/2)" & (3/4)" 18x(1/2)" & (3/4)"		12mm 15mm 18mm 20mm

For Water Equal Tee		Female Valve Socket
	15 x 15 x 10mm 20 x 20 x 15mm 22 x 22 x 15mm 25 x 25 x 20mm		15mm 20 x 1/2" 20 x 3/4" 22 x 1/2" 22 x 3/4" 25 x 1" 28 x 3/4" 28 x 1

Male Valve Socket		Support Sleeve
	15mm 20 x 1/2" 20 x 3/4" 22 x 1/2" 22 x 3/4" 25 x 1" 28 x 3/4" 28 x 1		10mm 15mm 20mm 22mm 25mm 28mm 35mm

Female Iron Socket Adaptor		Male Iron Socket Adaptor
	15mm 20mm		15mm 20mm

Gbag Rain		Male Valve Socket
	10mm 15mm 20mm 22mm 25mm 28mm 35mm		10mm 15mm 20mm 22mm 25mm 28mm 35mm

Spacer Washer		Male Ball Valve
	10mm 15mm 20mm 22mm 25mm 28mm 35mm		15mm

Female Ball Valve		Bent Tap Connector
	15mm		15mm

Straight Tap Connector		Butter Fly Valve
	15mm 22mm		15mm 22mm

Fix Stand		Straight Spigot Reducer
	-		15x10mm 22x15mm 28x22mm

Blank Cap		Pipe Cutter & Spray
	10mm 15mm 22mm

How To Carrying Out Work

Use For

• For the sanitary pipe laying for hot water supply
• Centrifugal heating pipe laying
• For heating of Korean warm floor
• For hot spring pipe laying
• Pipe laying of farming gardening
• For industrial purpose as is foods and chemicals